Fittings

NPT Tees

Threads conform with the American standard taper pipe thread & resist vibration. Tighten a minimum of 2-1/2 turns after hand tightening for air tight seal. Recommended uses include copper, brass, & iron.Working temp (pressure): -65°F to 250°F (1000 psi). Applications include oil, water, air, & natural gas. AGS brass and steel fittings are comprised of Tube Nuts, Unions (Couplers), Adapters, Elbows, Tees, Bushings, Connectors, Grease, etc... AGS fittings are held to the strictest standards to perform flawlessly in their intended applications. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments.

Cap Screw

AGS cap screws are made of low-carbon steel and are common in construction or repair projects. Recommended uses include metal to metal. Working temp (pressure): -65°F to 250°F. Applications include metal to metal fastening. AGS brass and steel fittings are comprised of Tube Nuts, Unions (Couplers), Adapters, Elbows, Tees, Bushings, Connectors, Grease, etc... AGS fittings are held to the strictest standards to perform flawlessly in their intended applications. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments.

Plastic Connectors

For windshield washer and vacuum lines. Made of high density polyethylene. Barbed ends allow quick connection. Recommended uses: multi-purpose tubing.Working temperatures: tubing dependent. Applications include vacuum, water, & anti-freeze lines. AGS brass and steel fittings are comprised of Tube Nuts, Unions (Couplers), Adapters, Elbows, Tees, Bushings, Connectors, Grease, etc... AGS fittings are held to the strictest standards to perform flawlessly in their intended applications. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments.

Plugs

Use AGS plugs for terminating or plugging a port opening. Tighten with a wrench for a leak-proof seal. Recommended uses include copper, brass, aluminum, & steel hydraulic tubing. Working temperatures: -65°F to 250°F. Applications include brake, fuel, transmission. AGS brass and steel fittings are comprised of Tube Nuts, Unions (Couplers), Adapters, Elbows, Tees, Bushings, Connectors, Grease, etc... AGS fittings are held to the strictest standards to perform flawlessly in their intended applications. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments.

Tube Nuts

Tube nuts are used in all types of automotive hydraulic lines, including brake fuel, oil, and transmission. To make a connection, place nut over the tubing with the threaded end pointed towards the end to be flared (repeat on the other end of tube). The tubes flare will be clamped between the nut and the flare seat when tightened. Tube Nuts come in a retail-oriented clamshell package in a quantity of 5, a bulk Ziploc bag in a quantity of 10, or a small plastic bag in a quantity of 1.

Push-On Hose Fittings

For low & medium pressure applications. Quick connecting and high resistance to vibration. Recommended uses: multi-purpose hose.Working temp (pressure): -40°F to 250°F (150 psi). Applications include fuel, fluid, & vacuum. AGS brass and steel fittings are comprised of Tube Nuts, Unions (Couplers), Adapters, Elbows, Tees, Bushings, Connectors, Grease, etc... AGS fittings are held to the strictest standards to perform flawlessly in their intended applications. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments.

NPT Elbow

Threads conform with the American standard taper pipe thread & resist vibration. Tighten a minimum of 2-1/2 turns after hand tightening for air tight seal. Recommended uses include copper, brass, & iron.Working temp (pressure): -65°F to 250°F (1000 psi). Applications include oil, water, air, & natural gas. AGS brass and steel fittings are comprised of Tube Nuts, Unions (Couplers), Adapters, Elbows, Tees, Bushings, Connectors, Grease, etc... AGS fittings are held to the strictest standards to perform flawlessly in their intended applications. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments.

NPT Nipples

Threads conform with the American standard taper pipe thread & resist vibration. Tighten a minimum of 2-1/2 turns after hand tightening for air tight seal. Recommended uses include copper, brass, & iron.Working temp (pressure): -65°F to 250°F (1000 psi). Applications include oil, water, air, & natural gas. AGS brass and steel fittings are comprised of Tube Nuts, Unions (Couplers), Adapters, Elbows, Tees, Bushings, Connectors, Grease, etc... AGS fittings are held to the strictest standards to perform flawlessly in their intended applications. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments.

NPT Coupling

Threads conform with the American standard taper pipe thread & resist vibration. Tighten a minimum of 2-1/2 turns after hand tightening for air tight seal. Recommended uses include copper, brass, & iron.Working temp (pressure): -65°F to 250°F (1000 psi). Applications include oil, water, air, & natural gas. AGS brass and steel fittings are comprised of Tube Nuts, Unions (Couplers), Adapters, Elbows, Tees, Bushings, Connectors, Grease, etc... AGS fittings are held to the strictest standards to perform flawlessly in their intended applications. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments.

Drain Cock

AGS drain cocks are for low pressure applications. External seat & internal seat drain cocks provide leak-proof metal to metal seal with only hand tightening. Working temp (pressure): -65°F to 250°F (150 psi). Applications include water, air, gas, & fluids. AGS brass and steel fittings are comprised of Tube Nuts, Unions (Couplers), Adapters, Elbows, Tees, Bushings, Connectors, Grease, etc... AGS fittings are held to the strictest standards to perform flawlessly in their intended applications. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments.

Male Clamp Hose Fittings

AGS male clamp hose fittings are for low-pressure multi-purpose hose applications. To assemble, cut hose squarely. Slide clamp onto hose and then lubricate. Push hose onto fitting until bottoming out. Position clamp between fitting ball and end of hose. Working temp (pressure): -40°F to 250°F (60 psi). Applications include fuel, oil, & vacuum.AGS brass and steel fittings are comprised of Tube Nuts, Unions (Couplers), Adapters, Elbows, Tees, Bushings, Connectors, Grease, etc... AGS fittings are held to the strictest standards to perform flawlessly in their intended applications. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments.

Grease Fittings

AGS Grease Fittings are used in many multi-purpose automotive applications. Plated to resist corrosion. Fittings are hardened and supplied with ball check (except drive-type). Maximum pressure: 10,000 psi (Drive-Type is 1000 psi). AGS brass and steel fittings are comprised of Tube Nuts, Unions (Couplers), Adapters, Elbows, Tees, Bushings, Connectors, Grease, etc... AGS fittings are held to the strictest standards to perform flawlessly in their intended applications. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments.

NPT Bushings

Convert between different NPT thread sizes. Threads conform with the American standard taper pipe thread & resist vibration. Tighten a minimum of 2-1/2 turns after hand tightening for air tight seal. Recommended uses include copper, brass, & iron. Working temp (pressure): -65°F to 250°F (1000 psi). Applications include oil, water, air, & natural gas. AGS brass and steel fittings are comprised of Tube Nuts, Unions (Couplers), Adapters, Elbows, Tees, Bushings, Connectors, Grease, etc... AGS fittings are held to the strictest standards to perform flawlessly in their intended applications. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments.

Male NPT to Compression

Adapts a compression connection to a thread which conform with American standard taper pipe thread. Recommended uses include copper, brass, & aluminum. Working temperatures are tubing dependent.Applications include oil, water, air, & natural gas. AGS brass and steel fittings are comprised of Tube Nuts, Unions (Couplers), Adapters, Elbows, Tees, Bushings, Connectors, Grease, etc... AGS fittings are held to the strictest standards to perform flawlessly in their intended applications. Fittings are offered in a variety of packaging options, including: retail clam-shells, bulk boxed, and plastic tray assortments.

Unions

Unions are used to join two brake, fuel, or transmission lines together. This may be needed, for example, in long runs from the dual master cylinder to the rear axle. Match the thread and flare type to the lines being connected. It is important that both flare type and thread match for a leak-proof connection. Unions come in a retail-oriented clamshell package in a quantity of 1, a bulk Ziploc bag in a quantity of 10, or a small plastic bag in a quantity of 1.

Adapters

Adapters are used to allow connection of standard brake lines to the different sized ports used in master cylinders. Simply match the male side of the adapter to the port connection on the dual master cylinder and the female side of the adapter to the brake line connection to be made. Adapters come in a retail-oriented clamshell package in a quantity of 1, a bulk Ziploc bag in a quantity of 10, or a small plastic bag in a quantity of 1.

Compression Unions

Compression unions are used in low-pressure applications such as: air, oil, and water. They are generally used to connect lengths of copper, brass, and aluminum tubing. To make connection, place the nut and then the sleeve over the tubing and then insert tube into the fitting body. When tight, the wedging action of sleeve between body and nut create a leak free connection. Compression Unions come in a retail-oriented clamshell package in a quantity of 1, a bulk Ziploc bag in a quantity of 10, or a small plastic bag in a quantity of 1.

Assortments & Tools

Find the exact fitting assortment(s) you need to keep the right fittings on-hand for the jobs you perform most. No more trying to locate the fitting you need and waiting for it to arrive, meanwhile holding up the repair and costing you time and money. The handy Fitting Sizing Gauge’s help you locate what fitting you need – Metric and SAE.